Tension Clamps are used to fix cables to racks, building fasteners, or wire poles, and clamps are installed at the start and end of the cable line, suspension, branch, or corner, and at the same time, tension clamps can also be used to prevent the cable from drooping or forming local due to the effect…
The drop wire clamp is composed of a body, a wedge, and a shim. A solid wire bail is crimped to the wedge. All parts are made out of stainless steel. Fiber optic drop cable clamp made of stainless steel material. It is furnished with a perforated gasket which increases the tension load on the…
A drop wire clamp is utilized to aid one or two pairs of fiber drop wire at the span clamps, drive hooks, and different kinds of other attachments for the drop. It is used, in addition, to aid the aerial service of terminals drop the span at the building and the messenger strand. Drop wire…
There are different types of ADSS cable anchor clamps. It is designed to access a dead-ending aerial ADSS cable on the network. It is made of UV-protected thermoplastic. It can be used in conditions equivalent to years of service in tropical environments. It is easy to install and operate. Which can save workers time. The…
Q span clamp is used to provide drop wire take-offs along the span and relieve tension on the drop at this point. Made of corrosion-resistant, high-quality steel Mechanically galvanized to meet ASTM specifications A153 and B965 The minimum tensile strength of the clamping plates is 80,000 PSI The minimum tensile strength of the hook is…
A drop wire clamp enables a cable, like a coaxial cable, to get attached and supported to a pole, building, or any other kind of support wire in a way that decreases any compromise made to the signal transmission capacity of the drop wire cable. The clamp is also beneficial as it supports the cable…
The fiber optical plastic wire clamp is used to connect triple overhead access cable to equipments or buildings.Widely used for indoor and outdoor installation. Fiber optical drop wire clamp consists of two parts,the plastic part made of nylon,steel hook is hot dip galvanised or stainless steel.Cable drawing hooks are made of carban steel(Zinc Plated,Hot dip…
Drop wire clamps for fiber optic cable is used to connect an overhead entrance fiber cable to an optical device of a house. The drop wire clamp is composed of a body, a wedge and a shim.A solid wire bail is crimped to the wedge. All parts are made out of stainless steel.Fiber optic drop…
Drop wire clamp with S hook is designed to support both ends of 1 and 2-pair reinforced service drops and to connect a triplex overhead entrance cable to a devices or buildings.Widely used both indoor installation and outdoor installation.Provided with a serrated shim to increase hold on drop wire. Used to support one and two…
86-18903390899